Search found 39 matches

by koreandi
Sun Sep 24, 2017 10:02 am
Forum: Germany
Topic: Up Mini abzugeben
Replies: 1
Views: 3804

Up Mini abzugeben

Hallo zusammen, nach nun 3 tollen Jahren mit dem Up Mini werde ich diesen nun abgeben. Ich habe diverse Mods durchgeführt: - Umbau auf Bowden - E3D Hotend - Hotbed Temp-switch (60°C & OFF & 80°C) - Glasplatte, einseitig mit BuildTak beklebt - Kugelgelagerte Filamentablage für alle Spulen passend Ich...
by koreandi
Mon Sep 26, 2016 5:35 am
Forum: General Discussion
Topic: Console/MDI Input on Up! Mini
Replies: 2
Views: 3785

Re: Console/MDI Input on Up! Mini

Hi Kai,

my code looks quite similar. I added a beep-countdown on the extrusion.
Also I increased the speed of extruder in 3 steps on withdraw and extrusion.
If any one is interested in the code I can upload it.

greetings
koreandi
by koreandi
Thu Sep 15, 2016 6:08 am
Forum: General Discussion
Topic: Console/MDI Input on Up! Mini
Replies: 2
Views: 3785

Console/MDI Input on Up! Mini

Hi there, I am using an UP! Mini with simplify3d and the G-Code Transcoder (thanks to mr_x). It works all fine and I am very Happy with that solution. Is there any way that I can use my UP! Mini via MDI Input? MDI (Manual Data Input) means that I can Input a single G-Code Line and directly transfer ...
by koreandi
Sun Apr 24, 2016 3:43 pm
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 48310

Re: G-Code transcoder part 3 (printing objects)

Hi all... blame on me... As I am not an IT specialist I am struggling with the Nozzle height. I used Simplify with my Up! Mini. To set the Nozzle height I used a negative Origin Offset of 6.7mm. This used to work fine until I want to print with support. All the supports stops 6.7mm before my object....
by koreandi
Sat Mar 12, 2016 10:28 am
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 48310

Re: G-Code transcoder part 3 (printing objects)

Hi mr_x, thank a lot for sharing your work. I also wanted to use a sliced part on my UP! MINI. slicing and uploading was no problem. I set the build volume to x 120 y 120 z 123 The origin values are x 0 y 0 z 0 and all set to MIN. Whan the printer want to start the first Layer it moves the nozzle ag...
by koreandi
Fri Feb 19, 2016 11:37 am
Forum: Look! My Mod
Topic: UP Mini goes Bowden
Replies: 3
Views: 5241

Re: UP Mini goes Bowden

Hi,

the wiring isn´t really nice on my built. Have to redesign some smaller parts. But my focus was on the function.
That´s why I didn´t post a complete overview. :lol:

Hope to get it to a functional design very soon and then reload some pics.

Greetings
Andreas
by koreandi
Tue Feb 16, 2016 9:38 am
Forum: Look! My Mod
Topic: Any experience with PET, PETG, HIPS, etc.?
Replies: 8
Views: 9460

Re: Any experience with PET, PETG, HIPS, etc.?

Hi, I had some experience with PETG from Winbo (28€ kg). The result was quite similar to PLA. The print was very shiny, and also glassy to transparent. The Layerbond wasn´t that good and support/raft was not easy to remove. Warping didn´t happened on parts up to 80mm printsize. I used 230-240 °C Hot...
by koreandi
Mon Feb 15, 2016 11:19 am
Forum: Look! My Mod
Topic: UP Mini goes Bowden
Replies: 3
Views: 5241

Re: UP Mini goes Bowden

Here is a quick print of a Raspberry Pi case ( http://www.thingiverse.com/thing:922740 ) on PLA with 0,25mm Layer and speed normal with adjusted Layersettings. In the First picture you can see the hairy spots. The HoteEnd still spits material out of the nozzle when doing jumps. As I said I should in...
by koreandi
Fri Feb 12, 2016 11:47 am
Forum: Look! My Mod
Topic: UP Mini goes Bowden
Replies: 3
Views: 5241

UP Mini goes Bowden

Dear community, after struggeling with PLA prints I refit my UP Mini to a Bowden Extruder. Another reason was that I wanted to experiment with different Nozzles. As the UP Mini has Nozzles with inside threads I wanted to be able using "standard" Nozzles with M6 outside thread. And of course I did it...
by koreandi
Fri Oct 02, 2015 5:36 am
Forum: Look! My Mod
Topic: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !
Replies: 142
Views: 146492

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Hi zonosoft... I refitted my original UP! Mini Printerhead with an asian one. I was absolutely frustated not getting any succesfull print with PLA anymore (had the Temp-mod / Software-mod / New spool holder / extra fans and cooling segments). I am using a 0,4mm nozzle (have also a 0,2 / 0,3 / 0,5) a...
by koreandi
Sat Sep 19, 2015 4:04 pm
Forum: Germany
Topic: Endlich PLA auf UP! Mini
Replies: 16
Views: 22379

Re: Endlich PLA auf UP! Mini

So liebe Freunde... nachdem ich echt verzweifelt war und kein einziger PLA Druck mehr gelang habe ich folgendes Bestellt: http://goo.gl/Ko6Msy Ich baue meinen Drucker um und verpasse ihm einen neuen Extruder. Nachdem mir der mitgelieferte Motor zu schwach war, habe ich wieder den Orginalen genommen ...
by koreandi
Sat Sep 19, 2015 3:52 pm
Forum: Germany
Topic: Filament Lagerung
Replies: 6
Views: 7759

Re: Filament Lagerung

Reicht sicher auch für eine weile...
Nur wenn es nicht dicht ist zieht es eben Wasser und der Druck kann misslingen oder es wirft blasen ohne ende.
Da ich einfach inzwischen eine größere Sammlung an Filamenten habe, ist die Lebensdauer der einzelnen Rollen dementsprechend lange.
by koreandi
Thu Jun 11, 2015 12:01 pm
Forum: Germany
Topic: Endlich PLA auf UP! Mini
Replies: 16
Views: 22379

Re: Endlich PLA auf UP! Mini

Verzweiflung..... Nachdem ich durch diverse MODs anfangs relativ problemlos PLA Drucken konnte, will mir inzwischen bald kein Druck mehr gelingen. Hab nur noch clogging. Wie ist eure Erfahrung inzwischen mit PLA? Ich habe mir inzwischen eine Spule PETG gekauft. Das ist zwischen ABS und PLA einzuordn...
by koreandi
Sun Feb 22, 2015 11:23 am
Forum: Look! My Mod
Topic: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !
Replies: 142
Views: 146492

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Hi, my experience with 0,1mm printing is to set the field Scan Scale Hatch Scale Support Scale to 50% of original value. In my case: Scan Scale - 0.5 Hatch Scale - 0.525 Support Scale - 0.45 You can roughly double ckeck this if you make a print previev with a model at original 0.2mm settings. Write ...
by koreandi
Mon Feb 16, 2015 3:23 pm
Forum: Look! My Mod
Topic: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !
Replies: 142
Views: 146492

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Oh my god... you are a genius. I already tried 0,15mm on my Mini without any issues. Whatabout if I go deeper into settings like the scan speed. Will it automaticly compensate the feed of my filament? You know what I mean? Or do I have to balance it manually? Could you add a help feature on your SW ...
by koreandi
Thu Feb 12, 2015 3:14 pm
Forum: Look! My Mod
Topic: Spoolholder MOD
Replies: 3
Views: 6385

Re: Spoolholder MOD

Hi roller, thanks for the advice with the foam. I planned to add a filament cleaner anyway to my system. http://www.thingiverse.com/thing:492067 I had this case once with a bad filament. The filament was completely twisted on the spool. And it suddenly unrolled a few meters on the spool. But with ot...
by koreandi
Thu Feb 12, 2015 3:05 pm
Forum: Look! My Mod
Topic: Heatbed Temp MOD
Replies: 3
Views: 6450

Re: Heatbed Temp MOD

No, not yet. The NC thermal resistance gives out a 50 M Ohm resistance if it reaches the temperature. And if I just interrupt the circuit I simulate a unlimited resistance. That means that the 12V won´t flow through the board. In the Software the UP! is shown with 60°C on the bed no matter what temp...
by koreandi
Thu Feb 12, 2015 10:28 am
Forum: Germany
Topic: PLA Druck
Replies: 9
Views: 13418

Re: PLA Druck

Hallo zusammen, nachdem ich auch durch MODs endlich PLA drucken kann (schon 2+ Stunden Drucke getestet) IMG_4975.JPG will ich hier die links aus diesem Forum unter Look! My Mod teilen. Spulenhalter http://www.pp3dp.com/forum/viewtopic.php?f=28&t=54766 Extruder Temp mod http://www.pp3dp.com/forum/vie...
by koreandi
Thu Feb 12, 2015 10:21 am
Forum: Germany
Topic: Filament Kompendium
Replies: 11
Views: 13160

Re: Filament Kompendium

Hi Marcus,

danke für die interessanten Statistiken...
Bin wohl doch zu sehr von mir aus gegangen.

Bin für jede konstruktive Kritik offen und nehme jeden Vorschlag an. Bei mir wird es wie folgt dargestellt
Ansicht.jpg
Ansicht.jpg (118.57 KiB) Viewed 13071 times

Sehe alle Zeilen und Zellen. Hab Chrome als Browser unter win7.


Gruß
Andreas
by koreandi
Thu Feb 12, 2015 7:30 am
Forum: Look! My Mod
Topic: Heatbed Temp MOD
Replies: 3
Views: 6450

Heatbed Temp MOD

Hi there, I want to share my Hardware Mod for my UP! Mini I´ve realized so far. My intention was to be able to print PLA with the UP! Mini. To be able to have control of the HeatBed temp I soldered an additional 80°C thermal resistance on the 60°C one. IMG_5052.JPG I used a switch with 3 Positions. ...